Sondermann RM2D Pump | Castle Pumps Ltd

Currency Selector:

Home > Products > SONDERMANN Pumps > Sondermann Magnetic Range > Sondermann RM2D Pump

Sondermann RM2D Pump

Untitled Document

Magnetically coupled centrifugal pumps of building group 2D are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.

Housing, impeller, impeller magnet coating and rear casing can be made of either glass-fibre reinforced PP plastic or PVDF. Sleeve bearings, starting ring and centering shaft are made of 99.7% pure oxide ceramic. O-ring sealing of the housing is made of FPM, EPDM or FEP (optionally available).

The pump is equipped with a non-ventilated motor with two shaft ends. A pump head of size 8/60-30 is mounted to each side of the motor. The pump heads may also be connected in series to increase discharge pressure.

For aggressive and neutral liquids
For short-term and continuous operation

Material	PP, PVDF
Delivery Rate	up to 80 l/min
Delivery Head	up to 16m
Density	up to 1.35g/cm3
Motor	230/400V three-phase motor or 230V single-phase ac capacitor start-and-run motor, 250 watts, 50 Hz, insulation class F, protection class IP 54 motor speed 2,850min-1
Weight	7kg
Fluid Temp	PP -20° to +80°C PVDF -20° to +95°C
Pressure Range	PP up to 1.5 bar PVDF up to 2.5 bar
Terminal Box	Vertical
Discharge Point	Vertical

If you would like more information on the Sondermann Range, or would like to buy a certain model then please contact us.

<%Item_Image%>

Total Items: 0 | Checkout

| Total Order Value: £0.00